Precision parts processing precision parts
processing requirements have?
For precision parts, processing is very strict, feed processing operations, a knife, etc.
Have specific requirements for size, accuracy requirements, such as how many microns of plus or minus 1 mm, if the wrong size too much will become a waste, at this moment is the equivalent of reprocessed, time-consuming, and sometimes even make the whole processing scrap material, this will result in an increase in the cost, at the same time, the parts are certainly is unusable.
For precision parts processing mainly size requirements, such as the cylinder diameter is how many, have strict requirements, plus or minus error in the range of specified requirements is the qualified part, or are unqualified parts;
Three high also have specific strict requirements, plus or minus error also has a regulation, such as an embedded type cylinder (
Get the most basic components, for example)
, if the diameter is too large, more than the range of allowable error, will cause, not go in, if the actual diameter is too small, more than the negative value of allowable error threshold, will cause is too loose, inserted in unstable problem.
These are all substandard products, or cylindrical length is too long or too short, beyond the range of allowable error, are unqualified products, is will be obsolete, or reprocessed, this will inevitably result in an increase in the cost.
Above is the demand for precision parts processing, is the size of the main problems, must be in strict accordance with the additional drawings for processing, processing of actual size won't theory and drawing the same size, but, as long as the dimensions in the range of allowable error are qualified parts, so the precision parts processing requirement is in strict accordance with the theoretical size for processing.
Followed by advanced precision parts processing equipment and testing equipment, advanced processing equipment makes more simple when processing precision parts, precision is higher, the effect is better.
Testing equipment that can detect didn't meet the requirements of parts, let all sent to the customer's products truly meet the requirements.
Maintaining machined parts manufacturers is not as easy as it may seem. You have to do plenty of important tasks. So cruel is the truth unless you've got a to help you.
No more need to worry about the condition of your machined parts manufacturers with , a About Us that helps in making your machined parts manufacturers look machined parts manufacturers like never before. Visit Xavier Precision Components to know more.
Shenzhen Xavier Precision Components Co., Ltd., a manufacturer of About Us, might emphasize less hassle or less wasted time rather than emphasizing reliability or quality.