Precision machinery parts processing manufacturer how to manage the devolop lump problem although in precision machinery parts processing, turning almost impossible when considering all the factors, but some experts in the research on this question, that should consider mentioning all aspects of the turning processing.
We need to pay attention to many places, each factor is likely to be for us in the turning machining
, the existence of the potential influence factors.
So this for machining manufacturer, is a question worth deliberate, this can't just a problem alone, suggested that we (should) operator fully consider various factors in turning.
Machining of cutting is an important part of a quick collapse of cutting tool and workpiece scrap, greatly affected the production efficiency.
It is also a headache thing!
Response to the collapse edge, we probably learned that is caused by the cutting tool is too fragile, that we are in use, the blade can't work under load, however, blade Angle is too small will cause we can choose the high toughness, impact resistant tool, and reduce feed and cutting depth.
In view of the thermal crack, precision metal processing when we select use shock tool, is also at the same time it also need to have the requirement of high temperature resistant, and ensure the supply of coolant in the process of machining is smooth.
When cutting condition is extremely bad, cutting dosage is too large, have impact load, with micro crack in the blade or cutting tool material, due to welding, grinding residual stresses are present in the blade, and careless operation factors, such as possible causes the blade or cutting tools has broken.
Occurs after the damage form, tool can't continue to use, so that scrap.
The devolop tumor is a headache problem, need our operating crew increase cutting speed, when choosing the cutting tool use is cutting tool rake Angle groove.
And we are in the mechanical parts processing, and also had a lot of problems, and many manufacturers are faced with the problem.
Crater wear better solved, decrease the cutting speed and feed can be very good to prevent this kind of case.
To avoid irregular scraps discharge crater wear, also in trough type choose positive rake Angle of cutting tools, avoid this kind of case.
That is aimed at turning the Suggestions to common problems, hope in the turning precision metal processing chain, we can avoid the above problems, to make the ideal product.
The above information is derived from the shenzhen Xavier precision machining manufacturer company, Xavier will provide you with CNC machining
, precision metal processing, precision machinery parts processing, machinery parts processing, non-standard parts processing, metal processing, metal mechanical processing, fixture, test fixture, mold parts processing, etc.
More products please click on the link to see http://www for details.
Maintaining machined parts manufacturers is not as easy as it may seem. You have to do plenty of important tasks. So cruel is the truth unless you've got a to help you.
What are you waiting for? Don't you want to provide perfect support to machined parts manufacturers? If yes, so, switch to About Us right away!
By investing in an ethical supply chain, Shenzhen Xavier Precision Components Co., Ltd. position ourselves to engage with a driven, engaged customer base.